大约有 720 项符合查询结果（耗时：0.0219秒） [XML]
Command line for looking at specific port
... -np <protocol> | find "port #"
So for example to check port 80 on TCP, you can do this: netstat -np TCP | find "80"
Which ends up giving the following kind of output:
TCP 192.168.0.105:50466 64.34.119.101:80 ESTABLISHED
TCP 192.168.0.105:50496 64.34.119.101:80 ESTAB...
How can I connect to Android with ADB over TCP? [closed]
...e ADB over Wi-Fi from the device with the commands:
su
setprop service.adb.tcp.port 5555
stop adbd
start adbd
And you can disable it and return ADB to listening on USB with
setprop service.adb.tcp.port -1
stop adbd
start adbd
From a computer, if you have USB access already (no root required)
It is...
SQL - Query to get server's IP address
...TY('local_net_address') AS local_net_address,
CONNECTIONPROPERTY('local_tcp_port') AS local_tcp_port,
CONNECTIONPROPERTY('client_net_address') AS client_net_address
The code here Will give you the IP Address;
This will work for a remote client request to SQL 2008 and newer.
If you have ...
Comparing HTTP and FTP for transferring files
...aster. FTP requires a control channel and state be maintained besides the TCP state but HTTP does not. There are 6 packet transfers before data starts transferring in FTP but only 4 in HTTP.
I think a properly tuned TCP layer would have more effect on speed than the difference between application...
Rails server says port already used, how to kill that process?
...ype this in your terminal to find out the PID of the process:
$ lsof -wni tcp:3000
Then, use the number in the PID column to kill the process:
$ kill -9 PID
share
|
improve this answer
...
node and Error: EMFILE, too many open files
.../OFF NODE NAME
...
nodejs 12211 root 1012u IPv4 151317015 0t0 TCP 10.101.42.209:40371->54.236.3.170:80 (ESTABLISHED)
nodejs 12211 root 1013u IPv4 151279902 0t0 TCP 10.101.42.209:43656->54.236.3.172:80 (ESTABLISHED)
nodejs 12211 root 1014u IPv4 151317016 0t...
stop all instances of node.js server
...NING" | find "8080"
The fifth column of the output is the process ID:
TCP 0.0.0.0:8080 0.0.0.0:0 LISTENING 14828
TCP [::]:8080 [::]:0 LISTENING 14828
You could then kill the process with taskkill /pid 14828. If the proces...
What can be the reasons of connection refused errors?
...
If you try to open a TCP connection to another host and see the error "Connection refused," it means that
You sent a TCP SYN packet to the other host.
Then you received a TCP RST packet in reply.
RST is a bit on the TCP packet which indicate...
How to close TCP and UDP ports via windows command line
Does somebody knows how to close a TCP or UDP socket for a single connection via windows command line?
17 Answers
...
Checking network connection
...p (0.0048s latency).
Not shown: 999 filtered ports
PORT STATE SERVICE
53/tcp open domain
Nmap done: 1 IP address (1 host up) scanned in 23.81 seconds
As we can see, 53/tcp is open and non-filtered. If you are a non-root user, remember to use sudo or the -Pn argument for Nmap to send crafted pro...